The DIS-2/M Multi-D HD is an audio and video decoder with integrated audio and video storage. It is able to receive audio and video streams in various encodings via an Ethernet network (unicast or multicast), decode them in real-time via its BNC or HDMI interface. It additionally is able to save simultaneously the received live stream on the internal hard disk. The evaluation of the saved live stream is possible at any time on a workstation via Ethernet (e.g. with PView 7 or SeMSy^®III).

The DIS-2/M Multi-D HD is designed for installation and operation in a 19" module rack. In the case of a service, the DIS-2/M Multi-D HD modules can be quickly and easily exchanged (hot-plug functionality).

Features

• 1× IP audio and video channel
• Supports network cameras of Dallmeier and third-party suppliers
• Supports network cameras of Dallmeier with integrated motion detection and SmartFinder
• Supports recorders of Dallmeier incl. access to track modes via SeMSy^®III
• Supported video formats MPEG-2, MPEG-4, H.264
• Supported audio formats MPEG-1 Layer 2, G.711
• Supported frame rate up to 50 fps / 60 fps
• Supported resolutions SD, HD (720p, 1080i, 1080p)
• Supported bit rate up to 16 Mbps (constant or dynamic)
• Simultaneous decoding, output and storage
• Fast display times (little delay of less than 100 ms)
• BNC output SDTV (PAL/NTSC)
• HDMI output HDTV (SMPTE 296M, SMPTE 274M), Full HD
• Upscaling from SDTV to HDTV is supported
• Configuration with web browser via Ethernet
• Evaluation of saved live streams with PView 7 or SeMSy^®III via Ethernet
• User administration integrated
• Linux operating system (proprietary and hardened) on flash memory