The WSD-2 HD is an audio and video decoder with integrated audio and video memory. It is able to receive audio and video streams via an Ethernet network (unicast or multicast), decode and output them in real time via its BNC or HDMI interfaces. Furthermore, it is able to simultaneously save a received live stream on the internal hard disk. The evaluation of saved live streams is possible at any time on a workstation via Ethernet (e.g. with SMAVIA Viewing Client or SeMSy^® III).

The WSD-2 HD is a stand-alone device. Its compact and robust design allows the recorder to be used ad-hoc.

Features

• 2× IP audio and video channels
• Supports network cameras of Dallmeier and third-party suppliers
• Supports network cameras of Dallmeier with integrated motion detection and SmartFinder
• Supported video formats MPEG-2, MPEG-4, H.264
• Supported audio formats MPEG-1 Layer 2, G.711
• Supported frame rate up to 50 fps / 60 fps
• Supported resolutions SD, HD (720p, 1080i, 1080p)
• Supported bit rate up to 16 Mbps (constant or dynamic)
• Simultaneous decoding, output and storage
• Fast display times (little delay of less than 100 ms)
• BNC output SDTV (PAL/NTSC)
• HDMI output HDTV (SMPTE 296M, SMPTE 274M), Full HD
• Upscaling from SDTV to HDTV is supported
• Configuration with web browser via Ethernet
• Evaluation of saved live streams with SMAVIA Viewing Client or SeMSy^® III via Ethernet
• User administration integrated
• Linux operating system (proprietary and hardened) on flash memory